dmesg - 2013-02-11 14:04
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.11-gentoo (root@livecd) (gcc version 4.6.3 (Gentoo 4.6.3 p1.11, pie-0.5.2) ) #2 SMP Mon Feb 11 03:56:16 CET 2013
Command line: root=/dev/sda3
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000cfeb1fff] usable
BIOS-e820: [mem 0x00000000cfeb2000-0x00000000cfec7fff] reserved
BIOS-e820: [mem 0x00000000cfec8000-0x00000000cfee7bff] ACPI data
BIOS-e820: [mem 0x00000000cfee7c00-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: Dell Inc. PowerEdge R200/0TY019, BIOS 1.4.3 05/15/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 120000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfeb2 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0xcfeb1fff]
[mem 0x00000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfeb1fff] page 4k
kernel direct mapping tables up to 0xcfeb1fff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x12fffffff]
[mem 0x100000000-0x12fffffff] page 2M
kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfeb0000-0xcfeb1fff]
ACPI: RSDP 00000000000f2880 00024 (v02 DELL )
ACPI: XSDT 00000000000f2908 000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000000f2a20 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cfec8000 02545 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000cfee7c00 00040
ACPI: APIC 00000000000f2b14 00072 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000000f2b93 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000000f2be3 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000000f2c1b 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000000f2c57 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000000f2d8b 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cfecba00 00210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cfecbc10 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cfecb880 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cfecb8b0 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cfeca545 001E2 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfeca9bb 001E2 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfecae31 001E2 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfecb2a7 001E2 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfecb71d 00162 (v01 DELL PE_SC3 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009ffff]
node 0: [mem 0x00100000-0xcfeb1fff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048130
DMA zone: 64 pages used for memmap
DMA zone: 8 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831218 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfeb2000 - 00000000cfec8000
PM: Registered nosave memory: 00000000cfec8000 - 00000000cfee7000
PM: Registered nosave memory: 00000000cfee7000 - 00000000cfee8000
PM: Registered nosave memory: 00000000cfee8000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s78656 r8192 d23744 u524288
pcpu-alloc: s78656 r8192 d23744 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028666
Policy zone: Normal
Kernel command line: root=/dev/sda3
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4045704k/4980736k available (7569k kernel code, 788216k absent, 146816k reserved, 5443k data, 608k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
NR_IRQS:4352 nr_irqs:712 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2500.199 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.39 BogoMIPS (lpj=2500199)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
ACPI: Core revision 20120711
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X3320 @ 2.50GHz stepping 07
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (20001.59 BogoMIPS)
devtmpfs: initialized
xor: automatically using best checksumming function:
generic_sse: 7420.000 MB/sec
RTC time: 13:02:41, date: 02/11/13
NET: Registered protocol family 16
kworker/u:0 (26) used greatest stack depth: 6536 bytes left
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
kworker/u:0 (37) used greatest stack depth: 6288 bytes left
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
kworker/u:0 (52) used greatest stack depth: 5952 bytes left
kworker/u:0 (63) used greatest stack depth: 5536 bytes left
bio: create slab at 0
raid6: sse2x1 3726 MB/s
raid6: sse2x2 4132 MB/s
raid6: sse2x4 5878 MB/s
raid6: using algorithm sse2x4 (5878 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88012aa3d3e8), AE_NOT_FOUND (20120711/psparse-536)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff]
pci 0000:00:00.0: [8086:29f0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29f1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xcc60-0xcc7f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xcc80-0xcc9f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xcca0-0xccbf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xdfaffc00-0xdfafffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003)
pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xcc30-0xcc37]
pci 0000:00:1f.2: reg 14: [io 0xcc28-0xcc2b]
pci 0000:00:1f.2: reg 18: [io 0xcc38-0xcc3f]
pci 0000:00:1f.2: reg 1c: [io 0xcc2c-0xcc2f]
pci 0000:00:1f.2: reg 20: [io 0xcc40-0xcc4f]
pci 0000:00:1f.2: reg 24: [io 0xcc50-0xcc5f]
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
pci 0000:02:00.0: [1000:0058] type 00 class 0x010000
pci 0000:02:00.0: reg 10: [io 0xec00-0xecff]
pci 0000:02:00.0: reg 14: [mem 0xdfcec000-0xdfceffff 64bit]
pci 0000:02:00.0: reg 1c: [mem 0xdfcf0000-0xdfcfffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xdfb00000-0xdfbfffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [mem 0xdfdf0000-0xdfdfffff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
pci 0000:04:00.0: [14e4:1659] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [mem 0xdfef0000-0xdfefffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-ff]
pci 0000:05:05.0: [1002:515e] type 00 class 0x030000
pci 0000:05:05.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:05:05.0: reg 14: [io 0xdc00-0xdcff]
pci 0000:05:05.0: reg 18: [mem 0xdfff0000-0xdfffffff]
pci 0000:05:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:05.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:05:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:05.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xcfeb2000-0xcfffffff]
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xd0000000-0xfdffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [io 0x0800-0x087f]
pnp 00:09: [io 0x0880-0x08bf]
pnp 00:09: [io 0x08c0-0x08df]
pnp 00:09: [io 0x08e0-0x08e3]
pnp 00:09: [io 0x0900]
pnp 00:09: [io 0x0c00-0x0c0f]
pnp 00:09: [io 0x0c10-0x0c1f]
pnp 00:09: [io 0x0ca0-0x0ca7]
pnp 00:09: [io 0x0ca9-0x0cab]
pnp 00:09: [io 0x0cad-0x0caf]
pnp 00:09: [io 0x0c20-0x0c3f]
pnp 00:09: [io 0x0060-0x005f disabled]
pnp 00:09: [io 0x0064-0x0063 disabled]
system 00:09: [io 0x0800-0x087f] has been reserved
system 00:09: [io 0x0880-0x08bf] has been reserved
system 00:09: [io 0x08c0-0x08df] has been reserved
system 00:09: [io 0x08e0-0x08e3] has been reserved
system 00:09: [io 0x0900] has been reserved
system 00:09: [io 0x0c00-0x0c0f] has been reserved
system 00:09: [io 0x0c10-0x0c1f] has been reserved
system 00:09: [io 0x0ca0-0x0ca7] has been reserved
system 00:09: [io 0x0ca9-0x0cab] has been reserved
system 00:09: [io 0x0cad-0x0caf] has been reserved
system 00:09: [io 0x0c20-0x0c3f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [io 0x0ca8]
pnp 00:0a: [io 0x0cac]
system 00:0a: [io 0x0ca8] has been reserved
system 00:0a: [io 0x0cac] has been reserved
system 00:0a: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:0b: [mem 0xe0000000-0xf3ffffff]
system 00:0b: [mem 0xe0000000-0xf3ffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 9: assigned [mem 0xd8000000-0xd81fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd81fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:05:05.0: BAR 6: assigned [mem 0xdff00000-0xdff1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd81fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:04: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xdff00000-0xdfffffff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0xd0000000-0xfdffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:1d.2: Performing full reset
pci 0000:05:05.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbeb0000-0xcfeaffff] (64MB) mapped at [ffff8800cbeb0000-ffff8800cfeaffff]
microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1360587761.220:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 7901
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:07: [io 0x02f8-0x02ff]
serial 00:07: [irq 3]
serial 00:07: activated
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
kworker/u:1 (721) used greatest stack depth: 5528 bytes left
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
mpt2sas version 13.100.00.00 loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xcc30 ctl 0xcc28 bmdma 0xcc40 irq 23
ata2: SATA max UDMA/133 cmd 0xcc38 ctl 0xcc2c bmdma 0xcc48 irq 23
tg3.c:v3.124 (March 21, 2012)
tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:21:9b:fb:e7:3c
tg3 0000:03:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:04:00.0: eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:21:9b:fb:e7:3d
tg3 0000:04:00.0: eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:04:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
sky2: driver version 1.30
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068E B3: Capabilities={Initiator}
tsc: Refined TSC clocksource calibration: 2500.174 MHz
Switching to clocksource tsc
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: ATAPI: TSSTcorpDVD-ROM TS-L333A, D100, max UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-L333A D100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 8x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg0 type 5
ata2.00: failed to resume link (SControl 0)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
scsi2 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 8, phy 0, sas_addr 0x1221000000000000
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C 0-33 PQ: 0 ANSI: 5
scsi 2:0:0:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP2504C 0-33 PQ: 0 ANSI: 5
scsi 2:0:1:0: Attached scsi generic sg2 type 0
mptsas: ioc0: attaching raid volume, channel 1, id 0
scsi 2:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
sd 2:1:0:0: Attached scsi generic sg3 type 0
sd 2:1:0:0: [sda] 487325696 512-byte logical blocks: (249 GB/232 GiB)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
sd 2:1:0:0: [sda] Write Protect is off
ehci_hcd 0000:00:1d.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
sd 2:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 2:1:0:0: [sda] Got wrong page
sd 2:1:0:0: [sda] Assuming drive cache: write through
sd 2:1:0:0: [sda] Got wrong page
sd 2:1:0:0: [sda] Assuming drive cache: write through
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdfaffc00
ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.11-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cc60
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cc80
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
sda: sda1 sda2 sda3
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
sd 2:1:0:0: [sda] Got wrong page
NET: Registered protocol family 17
Key type dns_resolver registered
sd 2:1:0:0: [sda] Assuming drive cache: write through
sd 2:1:0:0: [sda] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 1:141:28
console [netcon0] enabled
netconsole: network logging started
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 608k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 608k freed
Freeing unused kernel memory: 1684k freed
ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3: status 0501 change 0001
ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001403 0 ACK POWER sig=k CSC CONNECT
hub 1-0:1.0: port 4: status 0501 change 0001
ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 5: status 0501 change 0001
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00
uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00
hub 1-0:1.0: state 7 ports 6 chg 0038 evt 0000
hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 3 reset complete, port enabled
ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-3: new high-speed USB device number 2 using ehci_hcd
ehci_hcd 0000:00:1d.7: port 3 reset complete, port enabled
ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-3: default language 0x0409
usb 1-3: udev 2, busnum 1, minor = 1
usb 1-3: New USB device found, idVendor=090c, idProduct=1000
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: SerialNumber: B1212230000097
usb 1-3: usb_probe_device
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: adding 1-3:1.0 (config #1, interface 0)
usb-storage 1-3:1.0: usb_probe_interface
usb-storage 1-3:1.0: usb_probe_interface - got id
scsi3 : usb-storage 1-3:1.0
hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 4 low speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 5 reset complete, port enabled
ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-5: new high-speed USB device number 4 using ehci_hcd
ehci_hcd 0000:00:1d.7: port 5 reset complete, port enabled
ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-5: udev 4, busnum 1, minor = 3
usb 1-5: New USB device found, idVendor=04b4, idProduct=6560
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5: usb_probe_device
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: adding 1-5:1.0 (config #1, interface 0)
hub 1-5:1.0: usb_probe_interface
hub 1-5:1.0: usb_probe_interface - got id
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
hub 1-5:1.0: standalone hub
hub 1-5:1.0: individual port power switching
hub 1-5:1.0: individual port over-current protection
hub 1-5:1.0: TT per port
hub 1-5:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-5:1.0: Port indicators are supported
hub 1-5:1.0: power on to power good time: 100ms
hub 1-5:1.0: local power source is good
hub 1-5:1.0: enabling power on all ports
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.1: port 2 portsc 01a3,00
hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
loadkeys (1005) used greatest stack depth: 3816 bytes left
init-early.sh (1001) used greatest stack depth: 3584 bytes left
usb 1-5: link qh256-0001/ffff880129f96600 start 1 [1/0 us]
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
usb 3-2: new low-speed USB device number 2 using uhci_hcd
usb 3-2: skipped 1 descriptor after interface
usb 3-2: default language 0x0409
usb 3-2: udev 2, busnum 3, minor = 257
usb 3-2: New USB device found, idVendor=046d, idProduct=c024
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB-PS/2 Optical Mouse
usb 3-2: Manufacturer: B16_b_02
usb 3-2: usb_probe_device
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: adding 3-2:1.0 (config #1, interface 0)
usbhid 3-2:1.0: usb_probe_interface
usbhid 3-2:1.0: usb_probe_interface - got id
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2
hid-generic 0003:046D:C024.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
hub 1-5:1.0: state 7 ports 4 chg 0000 evt 0000
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
usb usb2: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
systemd-udevd[1126]: starting version 197
scsi 3:0:0:0: Direct-Access 1100 PQ: 0 ANSI: 4
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 3:0:0:0: [sdb] 63180800 512-byte logical blocks: (32.3 GB/30.1 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
EXT3-fs (sda3): using internal journal
Adding 524284k swap on /dev/sda2. Priority:-1 extents:1 across:524284k
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
tg3 0000:03:00.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:04:00.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:04:00.0: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0: eth1: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
gsettings[2033]: segfault at 10 ip 00007f32c52ec633 sp 00007fff80c57d08 error 6 in libgio-2.0.so.0.3200.4[7f32c5244000+148000]
gsettings[2035]: segfault at 10 ip 00007ff349ccd633 sp 00007fff77b722f8 error 6 in libgio-2.0.so.0.3200.4[7ff349c25000+148000]